BÖHLER T670
BÖHLER T670 is a corrosion-resistant steel for aerospace applications in the form of bars, wire, and forgings with diameters/thicknesses up to 305 mm in the solution-annealed condition, as well as pre-forging material of any size.
It is a martensitic, precipitation-hardenable chromium-nickel-copper-molybdenum steel with high strength and toughness.
BÖHLER T670 is primarily suitable for parts requiring corrosion resistance close to that of Cr-Ni 18-8 steels and exceeding the strength of martensitic 12% Cr steels. This steel can be processed in the solution-annealed condition and, through precipitation treatment, achieves tensile strengths of up to 1080 MPa with good ductility and strength in the transverse directions, even in large cross-sections.
Certain processing methods and operating conditions can cause stress corrosion cracking in these products.
Formes de produits disponibles
Produit long: Les données indiquées concernent exclusivement les produits longs. Veuillez tenir compte des remarques à la fin de la fiche technique (pdf).
Route de la fonte
Air fondu
Caractéristiques de la propriété
Acier au Cr-Ni-Cu martensitique inoxydable durcissable à solidité et ténacité élevées. Une augmentation supplémentaire de la solidité peut être obtenue par formage à froid suivi d’un durcissement par précipitation.
Numéros de matériaux
- Market grade
- S143
Normes
- BS
- S143
- BS
- S144
- BS
- S145
Composition chimique
* Composition chimique (% moyen)
- C
- max. 0.07
- Si
- max. 0.60
- Mn
- max. 1.00
- P
- max. 0.035
- S
- max. 0.025
- Cr
- 13.2 to 14.7
- Mo
- 1.20 to 2.00
- Ni
- 5.0 to 5.8
- Cu
- 1.20 to 2.00
- Nb
- 0.10 to 0.40